Kneader picture and its products:
AVAILABLE PRODUCTS:
DOW Corning, Silicone sealant, sealant,polyurethane sealant ,adhesive, ink, dope, pigment, dye, carbon, CMC, cosmetic, foodstuff, battery, medicine, plastic and other viscosity fluid etc.
CHARACTER:
1) Available models normal pressure, high pressure and vacuum.
2) Temperature adjustment: heated by oil, steam or electricity, cooled by water.
3) Discharge method: tilt dump, bottom dump and screw discharge.
4) The seal of shaft agitator is adopted with unique balance construction of vacuum box, Which owns patent.
5) The cover is controlled by hydraulic system.
MAIN FUNCTION:
Kneader is a equipment for mixing, kneading, crushing and dispersing viscosity fluid.
Technical parameters:
Model
| Cylinder volum(L) | Drive motor power (KW) | Stirring speed (rpm)
|
Discharge mode
|
Heating
| |||||
Full volume | Feeding amount | Paddle fast / slow paddle |
|
| ||||||
NHZ5 | 5 | 3 | 2.2-4 | 75/50 | Turn cylinder |
Hot oil
|
Power
|
Steam
| ||
NHZ20 | 20 | 12 | 3-5.5 | 63/42 | Turn cylinder | |||||
NHZ50 | 50 | 30 | 4-7.5 | 63/42 | Turn cylinder | |||||
NHZ100 | 100 | 60 | 5.5-7.5 | 43/29 | Turn cylinder | |||||
NHZ200 | 200 | 120 | 7.5-15 | 43/29 |
Turn cylinder |
The material under
|
Screw the material
| |||
NHZ300 | 300 | 180 | 11-18.5 | 43/29 | ||||||
NHZ500 | 500 | 300 | 18.5-30 | 43/29 | ||||||
NHZ1000 | 1000 | 600 | 22-55 | 32/22 | ||||||
NHZ1500 | 1500 | 900 | 30-90 | 32/22 | ||||||
NHZ2000 | 2000 | 1200 | 45-110 | 32/22 | ||||||
Remarks: 1,Temperature range: 0-300° 2, Pressure range:-0.1-0.6MPa | ||||||||||
| Available products: |
1. Unsaturated resins, alkyd resins, acrylic resins, polyurethane and other complete sets of production equipment;
2. Latex, white latex, rubber coating, film coating, all-purpose adhesive and other complete sets of production equipment;
3. Glass, plastic, silicone rubber, sealants and other sets of production equipment;
4. Raw rubber sets of production equipment;
5. Silicone waste pyrolysis recycling old solvent distillation recovery sets of production equipment;
6. Hot melt adhesive sets of production equipment;
7. Various types of powder mixing auger sets of production equipment;
8. Various non-standard chemical equipment design, production and installation.
| Main products: |
